​​Drywall Holes & Patches Fort Worth, TX

CLICK TO CONTACT US

Our Process For Patching Holes

If your walls are showing signs of incessant holes, you should seriously consider drywall repair. Not only will it be a hassle-free job for you but it can also save you money. This is because repairing damaged drywall can cost you more than having it replaced with new material. The repair cost will depend on various factors such as the size and kind of damage, the depth of the damage and the amount of work that will be involved in patching the holes. A professional drywall contractor can definitely get the job done at a cheaper price than doing it yourself.


There are three common types of drywall repairs. These include patching small holes, repairing big holes and replacing torn shingles or damaged tiles. Small holes may be repaired with sand ladders or with tape-based adhesive. Larger holes usually need to be patched with glue and then repainted. Here are the methods used for patching small and large holes:

Sand ladders are used when patching holes in the drywall. Before starting, spray the areas with water so that the drywall patches stick better. Patch the holes using an iron or screwdriver bit that has been sanded down before. Work slowly to avoid causing excess damage. Do this for several minutes until all the drywall patch has been applied.


Large holes often have to be repaired with drywall patches. For holes that have caused the wallboard paper to lift, use a drywall compound that has sanding paper on the bottom. Patch the holes with compound and then apply another layer of drywall compound to make the paper lift again. This process should be repeated as necessary until the wallboard paper is completely lifted.

Contact Us

Small cracks usually have to be painted with a primer before any drywall repairs can be done. Apply one coat of primer and then let it dry before starting to work on repairing the wall. When you start to notice puddles forming on the drywall, it's time to apply another coat.


If a hole or crack needs to be plugged or repaired, you will need a wire mesh tape. Cut the mesh tape to fit the size of the hole and wrap it around the affected area using tape. The tape will help keep the mesh tape tight to the drywall joint compound. Use a putty knife to scrape off the excess mesh tape and sand the area until it is smooth.


When there is damage to the drywall or ceiling, patching it isn't always as simple as replacing cracked or gouged panels. Sometimes the only option is to replace the whole panel. To do this, remove the damaged piece of drywall from the wall and place it in an area where you can see it. Peel back the paper backing and remove the damaged piece of drywall. Most patching compounds are designed to be used on peeling drywall.


Now you have to decide how much of the drywall compound to sand away. Usually the entire patching compound will need to be sanded at once. With some hardwood patching's, you can make each small hole larger by sanding just a little bit. Be careful not to move the damaged panel too much while you are sanding it. Once you have all the sanded areas of the damaged piece of drywall, the next step is to fill in the holes with the appropriate drywall joint compound.

Some homeowners make the mistake of installing the joint compound incorrectly. Nails that are too long can often cause water damage. If the nails are too long, they may actually cause water damage around the edges of the patched area. If the nails are too short, they won't be able to provide enough joint coverage.


There are several other common mistakes that can lead to drywall repairs that don't fix the problems. For example, many people make the mistake of caulking hairline cracks with nail heads that are too large. Small nails don't provide enough joint coverage when caulking. You should also avoid covering hairline cracks with too many layers of compound. It can eventually wear away at the surface of the drywall.


Even if the drywall patch job you need doesn't fix the problem, it's still a good idea to hire a contractor to replace the damaged drywall and look for a

wall patch service. The average cost of drywall tape repair usually isn't much more than replacing the entire drywall. The repair process can take just a few hours, and you'll end up with a professional looking finish that will last for years. It's also a lot less expensive than replacing the entire ceiling or re-ceiling. There's no reason not to call a pro when you have a problem.

Share by: